Lifetime Warranty for All Cables Shop Now!

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

More About USB 2.0 Repeaters

CableLeader is your trusted source for high-quality USB 2.0 Repeater Cables and USB 1.1 Extenders. Our extensive range of USB 2.0 Repeaters ensures reliable data transmission and signal integrity over extended distances. Whether you need to extend the reach of your USB devices or maintain optimal performance, CableLeader has the solution.

Our USB 2.0 Repeater Cables feature:

USB Type A Male to USB Type A Female connectors for easy plug-and-play connectivity
Support for 480 Mbps high-speed, 12 Mbps full-speed, and 1.5 Mbps low-speed data transfer rates
Compatibility with a wide range of USB devices, including cameras, printers, web cams, keyboards, and mice

Key applications and usage scenarios for USB 2.0 Repeaters include:

Extending USB device reach up to 16 feet (5 meters)
Maintaining signal quality and integrity over longer distances

At CableLeader, we prioritize quality and safety. Our USB 2.0 Repeater Cables are fully compliant with USB 2.0 and 1.1 specifications, ensuring reliable performance and compatibility with your devices. Trust CableLeader for your USB extension needs and experience the difference in signal quality and reliability.

USB 2.0 Repeaters: Extending USB Connectivity with Reliable Performance

Introduction to USB 2.0 Repeaters

USB 2.0 Repeaters, also known as USB 2.0 Extenders or USB 2.0 Active Extension Cables, are essential devices that enable the extension of USB connections beyond their standard length limitations. These innovative solutions are designed to maintain signal quality and integrity over extended distances, ensuring reliable data transfer and seamless connectivity for your USB devices.

USB 2.0 Repeaters typically feature a male USB Type A connector on one end and a female USB Type A port on the other, allowing for easy plug-and-play connectivity with existing USB cables. They incorporate active signal boosting technology, which amplifies and regenerates the USB signal, preventing signal degradation and ensuring optimal performance over longer cable runs.

Understanding USB 2.0 Connectors

USB 2.0 Repeaters utilize the standard USB Type A connectors, which are widely recognized and compatible with a vast array of USB devices. The USB Type A connector features a flat, rectangular shape with four exposed pins, making it easy to identify and connect.

USB Type A Male Connector: This connector is typically found on the host side, such as a computer or USB hub, and is used to initiate the connection.

USB Type A Female Port: This port is commonly found on peripheral devices like printers, cameras, or external storage devices, and is designed to receive the USB Type A male connector.

USB 2.0 Specifications and Data Transfer Rates

USB 2.0 Repeaters are fully compliant with the USB 2.0 and USB 1.1 specifications, ensuring compatibility with a wide range of USB devices. They support the following data transfer rates:

High-Speed (480 Mbps): Ideal for high-bandwidth applications like video streaming, data transfer, and external storage devices.
Full-Speed (12 Mbps): Suitable for devices such as printers, scanners, and input devices like keyboards and mice.
Low-Speed (1.5 Mbps): Designed for low-bandwidth devices like gaming controllers and certain input devices.

Applications and Usage Scenarios

USB 2.0 Repeaters find applications in various scenarios where extending the reach of USB devices is necessary. Some common use cases include:

Extending USB Device Reach: With USB 2.0 Repeaters, you can extend the distance between your USB devices and the host computer, allowing for more flexible placement and organization of your workspace.
Maintaining Signal Quality: Over longer distances, USB signals can degrade, leading to performance issues or connectivity problems. USB 2.0 Repeaters ensure that the signal remains strong and stable, even when traversing extended cable lengths.
Compatibility with a Wide Range of USB Devices: USB 2.0 Repeaters are designed to work seamlessly with a variety of USB devices, including cameras, printers, web cameras, keyboards, mice, and external storage devices, among others.

Product Quality and Safety

At CableLeader, we prioritize product quality and safety to ensure reliable performance and compatibility with your devices. Our USB 2.0 Repeater Cables and USB 1.1 Extenders are fully compliant with USB 2.0 and 1.1 specifications, ensuring seamless integration and optimal signal integrity.

We understand the importance of reliable connectivity in today's digital landscape, which is why we meticulously design and manufacture our USB 2.0 Repeaters with the highest quality standards. Trust CableLeader for your USB extension needs and experience the difference in signal quality, performance, and reliability.

Conclusion

USB 2.0 Repeaters from CableLeader offer a reliable and convenient solution for extending the reach of your USB devices while maintaining optimal signal quality and performance. With support for high-speed, full-speed, and low-speed data transfer rates, these repeaters are compatible with a wide range of USB devices, making them an essential addition to any workspace or setup. Invest in CableLeader's USB 2.0 Repeaters and experience seamless connectivity, enhanced productivity, and reliable data transfer over extended distances.

What is the difference between a USB extender and a USB repeater?

The main difference between a USB extender and a USB repeater is their approach to extending the USB signal. USB extenders use a male-to-female extension cable to physically extend the length of the USB cable, allowing you to connect devices over a longer distance. On the other hand, USB repeaters are active repeater cables with built-in signal amplification and regeneration circuitry, enabling them to extend USB signals over even greater distances while maintaining signal quality and integrity.

How do I extend my USB 2.0 cable?

To extend the reach of your USB 2.0 devices beyond the standard 5-meter (16.4 feet) limit, you can use one of the following methods:

Use a USB 2.0 active extension cable or USB 2.0 repeater cable, which incorporates signal boosting circuitry to maintain signal quality over longer distances. CableLeader offers high-quality USB 2.0 Repeater Cables that can extend your USB 2.0 devices up to 16 feet (5 meters).
Employ a USB extender kit, which typically consists of a transmitter (TX) and receiver (RX) unit connected via a Cat5e/Cat6 cable. This allows you to extend your USB devices over much greater distances, often up to 200 feet (60 meters) or more. CableLeader's USB 1.1 Extender supports extension up to 200 feet using a Cat5e cable.

What is the maximum length of a USB 2.0 cable?

According to the USB 2.0 specification, the maximum length for a standard USB 2.0 cable is 5 meters (16.4 feet). Exceeding this length without using an active extension or repeater cable can result in signal degradation and potential connectivity issues.

Do USB repeaters add latency?

Yes, USB repeaters can introduce some additional latency due to their receive, store, and forward method of operation. However, the latency introduced by a high-quality USB repeater is typically minimal and should not significantly impact most applications. It's important to note that using a USB hub can also add latency, as it acts as a repeater.

How long can a USB cable be without a repeater?

Without using an active extension or repeater cable, the maximum recommended length for a standard USB cable is:

USB 2.0: 5 meters (16.4 feet)
USB 3.0/3.1 Gen 1: 2 meters (6.6 feet)
USB 3.1 Gen 2: 1 meter (3.3 feet)

Exceeding these lengths can result in signal degradation and potential connectivity issues. To extend beyond these limits, an active cable or repeater is required.

More About USB 2.0 Repeaters

Our USB 2.0 Repeater Cables feature:

USB Type A Male to USB Type A Female connectors for easy plug-and-play connectivity
Support for 480 Mbps high-speed, 12 Mbps full-speed, and 1.5 Mbps low-speed data transfer rates
Compatibility with a wide range of USB devices, including cameras, printers, web cams, keyboards, and mice

Key applications and usage scenarios for USB 2.0 Repeaters include:

Extending USB device reach up to 16 feet (5 meters)
Maintaining signal quality and integrity over longer distances

USB 2.0 Repeaters: Extending USB Connectivity with Reliable Performance

Introduction to USB 2.0 Repeaters

Understanding USB 2.0 Connectors

USB Type A Male Connector: This connector is typically found on the host side, such as a computer or USB hub, and is used to initiate the connection.

USB Type A Female Port: This port is commonly found on peripheral devices like printers, cameras, or external storage devices, and is designed to receive the USB Type A male connector.

USB 2.0 Specifications and Data Transfer Rates

USB 2.0 Repeaters are fully compliant with the USB 2.0 and USB 1.1 specifications, ensuring compatibility with a wide range of USB devices. They support the following data transfer rates:

High-Speed (480 Mbps): Ideal for high-bandwidth applications like video streaming, data transfer, and external storage devices.
Full-Speed (12 Mbps): Suitable for devices such as printers, scanners, and input devices like keyboards and mice.
Low-Speed (1.5 Mbps): Designed for low-bandwidth devices like gaming controllers and certain input devices.

Applications and Usage Scenarios

USB 2.0 Repeaters find applications in various scenarios where extending the reach of USB devices is necessary. Some common use cases include:

Extending USB Device Reach: With USB 2.0 Repeaters, you can extend the distance between your USB devices and the host computer, allowing for more flexible placement and organization of your workspace.
Maintaining Signal Quality: Over longer distances, USB signals can degrade, leading to performance issues or connectivity problems. USB 2.0 Repeaters ensure that the signal remains strong and stable, even when traversing extended cable lengths.
Compatibility with a Wide Range of USB Devices: USB 2.0 Repeaters are designed to work seamlessly with a variety of USB devices, including cameras, printers, web cameras, keyboards, mice, and external storage devices, among others.

Product Quality and Safety

Conclusion

What is the difference between a USB extender and a USB repeater?

How do I extend my USB 2.0 cable?

To extend the reach of your USB 2.0 devices beyond the standard 5-meter (16.4 feet) limit, you can use one of the following methods:

Use a USB 2.0 active extension cable or USB 2.0 repeater cable, which incorporates signal boosting circuitry to maintain signal quality over longer distances. CableLeader offers high-quality USB 2.0 Repeater Cables that can extend your USB 2.0 devices up to 16 feet (5 meters).
Employ a USB extender kit, which typically consists of a transmitter (TX) and receiver (RX) unit connected via a Cat5e/Cat6 cable. This allows you to extend your USB devices over much greater distances, often up to 200 feet (60 meters) or more. CableLeader's USB 1.1 Extender supports extension up to 200 feet using a Cat5e cable.

What is the maximum length of a USB 2.0 cable?

Do USB repeaters add latency?

How long can a USB cable be without a repeater?

Without using an active extension or repeater cable, the maximum recommended length for a standard USB cable is:

USB 2.0: 5 meters (16.4 feet)
USB 3.0/3.1 Gen 1: 2 meters (6.6 feet)
USB 3.1 Gen 2: 1 meter (3.3 feet)

Exceeding these lengths can result in signal degradation and potential connectivity issues. To extend beyond these limits, an active cable or repeater is required.

()

USB 2.0 Repeaters

Product List

16ft USB 2.0 Active Extension / Repeater Cable IC Chip GL850A

5m USB 2.0 Active Extension / Repeater Cable

USB 1.1 Extender to 200 Feet by Cat5e

More About USB 2.0 Repeaters

USB 2.0 Repeaters: Extending USB Connectivity with Reliable Performance

Introduction to USB 2.0 Repeaters

Understanding USB 2.0 Connectors

USB 2.0 Specifications and Data Transfer Rates

Applications and Usage Scenarios

Product Quality and Safety

Conclusion

What is the difference between a USB extender and a USB repeater?

How do I extend my USB 2.0 cable?

What is the maximum length of a USB 2.0 cable?

Do USB repeaters add latency?

How long can a USB cable be without a repeater?

More About USB 2.0 Repeaters

USB 2.0 Repeaters: Extending USB Connectivity with Reliable Performance

Introduction to USB 2.0 Repeaters

Understanding USB 2.0 Connectors

USB 2.0 Specifications and Data Transfer Rates

Applications and Usage Scenarios

Product Quality and Safety

Conclusion

What is the difference between a USB extender and a USB repeater?

How do I extend my USB 2.0 cable?

What is the maximum length of a USB 2.0 cable?

Do USB repeaters add latency?

How long can a USB cable be without a repeater?

Contact Us

Find Us

Customer Services

Information

Find Us